CPB150 PowerBlock 150 Watt Stereo Guitar Amplifier
The Front Panel:
12345678
1. INPUT: Use this 1/4� jack to connect your5. LOW: Use this control to adjust the low fre-
instrument to the amplifier by means of aquency output of the amplifier.
shielded instrument cable.6. LEVEL: Use this control to adjust the over-
2. GAIN: Use this control to adjust the signalall output level of the amplifier.
level at the Input jack (#1). As you rotate this7.: The PowerBlock is great for private
control clockwise, overdrive distortion ispractice sessions - simply Connect a pair of
added to the sound.stereo headphones to this jack without con-
PlayerOs note: One way to get a wide range ofnecting the amp to your speakers. The signals
sounds is to start with the PowerBlockOs Gainat the Speaker Output jacks and the Line Out
control near fully clockwise and your guitarand Effects Send jacks jacks (#9, 12, and 14,
turned way down. The resulting clean soundrear panel) are not interrupted when head-
Ofattens up� as you bring up the volume on
your guitar. phones are used. (The signal at the head-
phones jack is enhanced by the speaker sim-
3. HIGH: Use this control to adjust the highulator circuitry for superior sound.)
frequency output of the amplifier.8. (POWER ON LED): This LED illuminates a
4. MID: Use this control to adjust the midrangecool blue when the amplifier is on.
frequency output of the amplifier.
4 |