CA30/30D Acoustic Amplifier
Connecting to the Insert jack:
The Insert jack (#11) lets you patch external effects into the amplifier just prior to its power amp stage. To
connect the effect to the insert jack use CrateOs CYC6MS stereo-to-mono Y-cord, or an adapter such as CrateOs
CA11Y and two shielded signal cables terminated with 1/4� tip/sleeve connectors as shown below.
For short runs,CA30DFor longer runs,CA30D
use Crate's CYC6M5LevelInsertLine OutPoweruse Crate's CA11YLevelInsertLine OutPower
6" insert adapter1-stereo-to-2-mono
to connect an effect1/4" adapter and two
to the Insert jack:mono 1/4" signal cables
0 10to connect an effect0 10
to the Insert jack:
TIP = RETURNTIP = RETURN
RING = SENDRING = SEND
SLEEVE = GROUNDSLEEVE = GROUND
CA11Y
TIP/RTNRING/SND
CYC6M5
TIP/RTNRING/SND
OUTPUTINPUTOUTPUTINPUT
JACK JACK JACK JACK
OChaining� Amplifiers:
The Line Out jack of one CA30/30D can be connected to the Insert jack of another, to chain the amps
together as shown below. (This frees up the Input jacks of the second amplifier.) Use a shielded signal
cable terminated with 1/4� tip/sleeve connectors as shown below.
AMP 1:AMP 2:
CA30DCA30D
LevelInsertLine OutPowerLevelInsertLine OutPower
0 100 10
AMP 1:AMP 2:
LINE OUTINSERT |